NUKRE40 Cam follower Stud Type track roller bearing 47x24x66mm

NUKRE40 Cam follower Stud Type track roller bearing Introduction:

?Cam followers have a solid stud (pin) that is threaded so that the cam follower can be quickly and easily attached to appropriate machine components by means of a hexagonal nut.

NUKRE40 Cam follower Stud Type track roller bearing Drawing:

NUKRE40 Cam follower Stud Type track roller bearing Pictures Showing:

NUKRE40 Cam follower Stud Type track roller bearing Other Types:

?KR design cam followers are fitted with a needle roller and cage assembly. They are also available with a full complement needle roller set, which is identified by the letter V at the end of the basic designation. The outer ring is axially guided by the pressed-on flange ring and the head of the stud, which also serves as an integral flange.

?NUKR .. A design cam followers are based on double row, full complement cylindrical roller bearings without an integral flange between the two roller sets. The stud head and pressed-on flange ring guide the outer ring axially via the roller sets. This enables NUKR .. A design cam followers to accommodate relatively heavy axial loads that are induced when operating in an inclined or tilted position.
?Needle roller bearing /cam follower is composed of a stud used as the tray of a group of rollers and a thick wall outer ring .The shoulder of the stud and the surface retaining ring on the stud form the guiding faces on the two sides of the outer ring. When the curve rollers are running on the plain tray or cam wheel, the inner stress on the rollers will increase due to the deformation of the outer ring.

NUKRE40 Cam follower Stud Type track roller bearing Packaging:

NUKRE40 Cam follower Stud Type track roller bearing Pyment & Shippment: